User`s manual

ioLogik E1200 Series Introduction
1-4
User-defined Modbus/TCP Addressing
For Modbus devices that are controlled and detected by fixed addresses, users need to spend a vast amount of
time researching and verifying the configurations. Users need to locate details for each device--such as the I/O
channel and vendor-defined modbus addresses--to enable the initial address or the start address of a SCADA
system or PLC. The ioLogik E1200, with user-definable Modbus/TCP addressing, offers greater flexibility, and
setup is easy. Instead of worrying over pre-defined addresses, users simply configure the function and address
map to fit their needs
MXIO library for Windows/WinCE/VB/VC.NET and Linux C
Moxa’s MXIO library supports the Windows, WinCE and Linux operating system, as well as the C++, VB/VC,
and .NET development platforms. The library’s large repository of C# and Visual Basic sample code makes it
easy to manage Ethernet I/O devices and data transfers with high-level computer languages. In addition, the
MXIO library’s active communication feature allows custom software developers to share in the benefits of push
technology and active I/O tags, thereby reducing network traffic by as much as 80%.
Web-based configuration with import/export capabilities
The ioLogik E1200 industrial Ethernet remote I/O allows you to monitor and control I/O status from anywhere
on the web via Internet Explorer, even including the import and export of configuration files.