User`s manual

ioLogik E1200 Series Using ioSearch
4-7
Batch TCP/IP Configuration on Multiple Devices
Users can batch modify IP addresses, subnet masks, and gateways for devices of the same model from a single
window while submitting the changes at one time. First, select several devices of the same model, click the
right mouse button, and then click “Change IP Address” in the pop-up menu to launch a new window.
The following screenshot shows the window used to modify IP addresses, subnet masks, and gateways. Users
can modify each item and click “Set” to confirm the modification, or click the “Advance” button to
automatically assign IP addresses incrementally.
After the “Advance” button is clicked, a window will pop up to allow users to use ioSearch to set the IP address
by MAC address. ioSearch will automatically set sequential IP addresses on the selected devices, with the
subnet mask and gateway set to the same value.
Restart System
Select this command to restart the selected ioLogik E1200.
Restarting multiple ioLogik E1200 units is allowed. Select the ioLogik E1200 and right click to process this
function.