User`s manual

ioLogik E1200 Series Using the Web Console
3-22
Sample Peer-to-Peer Configuration
The following is an example of configuring DO (Server IP: 192.168.127.253) to DI (Client IP: 192.168.127.252)
peer-to-peer functionality with two ioLogik E1200 devices.
Server settings:
Client settings:
Note: refer to the table below for maximum number of rules supported at different signal frequencies.
1 Hz 2 Hz 4 Hz 10 Hz 20 Hz
1 rule
    
10 rules
  
20 rules
  
30 rules
 
40 rules
 
50 rules

DO Safe Mode Settings
When a peer-to-peer rule on a local DO channel is not valid, the local DO channel will enter safe mode. You can
set the DO to be Hold Last, ON, or OFF in safe mode.