User`s manual

ioLogik E1200 Series Using the Web Console
3-17
The ioLogik E1200 allows you to manually adjust the current temperature reading. In each channel
configuration section, select the channel, apply the offset value, and click the “Submit” button to perform the
task.
TC Channels
The current status of each TC (Thermocouple) channel can be viewed on the TC Channel page.
Click on a specific channel to access the enabling or disabling of the TC channel. Select the “Enable TC
Channel” box and then select the sensor type that meets the physical attachment to the ioLogik E1200.
The ioLogik E1200 allows you to calibrate the temperature sensors. In each channel configuration section,
follow the instructions and click the “Calibrate” button to start the TC sensor calibration. Each calibration
requires about 30 seconds (per channel).