User`s manual

ioLogik E1200 Series Using the Web Console
3-15
AO Channels
The current status of each AO (analog output) channel can be viewed on the I/O Setting: AO Channel page
Click on a specific channel to access the AO channel settings, and then select the “Enable AO Channel” box.
The Auto Scaling function of the AO value can be defined on the same page.
There are two modes for the AI channels, Voltage Mode (V) and Current Mode (mA)
(Jumper Settings (DIO and AI))
Enabling the Auto Scaling: Point-Slope Formula function will linearly convert the actual current or voltage
value into other user defined units, such as percentage or ppm (parts per million).
Note that the scaled value’s Modbus address differs from the original value.
The Analog Output’s Alias Name can also be configured on this page.