User`s manual

ioLogik E1200 Series Using the Web Console
3-14
ATTENTION
When configuring the jumpers to select voltage or current measurement for the AI channels, open the cover by
first removing the screw on the back panel. Details on jumper settings can be found here:
Jumper Settings
(DIO and AI)
Enabling the Auto Scaling: Point-Slope Formula function will linearly convert the actual current or voltage
value into other user defined units, such as percentage or ppm (parts per million).
Note that the scaled value’s Modbus address differs from the original value.
The slope-intercept function is used to compensate when the measurement requires a slight adjustment.
The Analog Input’s Alias Name can also be configured on this page.