User`s manual

2
2. Getting Started
In this chapter, we explain how to connect the UC-8410/8416/8418/8430, turn on the power, and then get
started with programming and using other functions.
The following topics are covered in this chapter:

Powering on the

Connecting the UC-8410/8416/8418/8430/8430 to a PC
 Serial Console
 Telnet Console
 SSH Console

Configuring the Ethernet Interface
 Modifying Network Settings with the Serial Console
 Modifying Network Settings over the Network

Test Program
─
Developing Hello.c
 Installing the Tool Chain (Linux)
 Checking the Flash Memory Space
 Compiling Hello.c
 Uploading and Running the “Hello” Program