User`s manual

UC-8410/8416/8418/8430 Hardware User's Manual Introduction
1-3
Product Hardware Specifications
Computer
CPU: Intel XScale IXP435, 533 MHz
OS (pre-installed): Linux or Windows CE 6.0
DRAM: 256 MB DDR2 SDRAM onboard (512 MB max.)
SRAM: 256 KB, battery backup
Flash:
• NOR Flash onboard to store OS
> UC-8410/8416/8418: 16 MB
> UC-8430: 32 MB
• 32 MB NAND Flash onboard to store data
Expansion Bus: PCI/104 onboard
USB: USB 2.0 compliant hosts, type A connector
• UC-8410/8416/8418: 2 hosts
• UC-8430: 6 hosts
Storage
Storage Expansion: CompactFlash socket
Other Peripherals (UC-8430 only)
Audio: SM502 chip with line-in/out interface
Display (UC-8430 only)
Graphics Controller: SM502 chip
Display Interface: 15-pin D-Sub connector x 2
Resolution: CRT display mode with pixel resolution up to 1024 x 768
Ethernet Interface
LAN: 3 auto-sensing 10/100 Mbps ports (RJ45)
Switch Ports: 8 10/100 Mbps unmanaged ports (UC-8416 only)
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Serial Standards: 8 RS-232/422/485 ports, software-selectable (8-pin RJ45)
Console Port: RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (supports non-standard baudrates; see user's manual for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Digital Input
Input Channels: source type
• UC-8410/8416/UC8430: 4 channels
• UC-8418: 12 channels
Input Voltage: 0 to 30 VDC
Digital Input Levels for Dry Contacts:
• Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts:
• Logic level 0: +3V max.
• Logic level 1: +10V to +30V (COM to DI)