User`s manual

UC-8410/8416/8418/8430 Hardware User's Manual Introduction
1-2
Overview
The UC-8410/8416/8418/8430 features 8 RS-232/422/485 serial ports, 3 10/100 Mbps Ethernet ports, 4
digital input channels and 4 digital output channels (12 digital input channels and 12 digital output channels for
the UC-8418), 8 10/100 Mbps switch ports (UC-8416 only), a CompactFlash slot for flash disk expansion, and
2 USB ports (6 USB ports for UC-8430) for adding additional memory (such as a USB flash drive).
The UC-8410/8416/8418/8430 uses an Intel XScale IXP435 533 MHz RISC CPU. Unlike the X86 CPU, which
uses a CISC design, the IXP435's RISC design architecture and modern semiconductor technology provide the
UC-8410/8416/8418/8430 with a powerful computing engine and communication functions, but without
generating a lot of heat. The built-in 16 MB (32 MB for UC-8430) NOR Flash ROM and 256 MB SDRAM give you
enough memory to run your application software directly on the UC-8410/8416/8418/8430. Since the dual LAN
ports are built into the IXP435 CPU, the UC-8410/8416/8418/8430 is good solution for network security
applications.
Package Checklist
All models of the UC-8410/8416/8418/8430 series are shipped with the following items:
• 1 UC-8410/8416/8418/8430 series embedded computer
• Wall-mounting kit
• DIN-Rail mounting kit
• Quick Installation Guide
• Document & Software CD
• Cross-over Ethernet cable
• CBL-4PINDB9F-100: 4-pin pin header to DB9 female console port cable, 100 cm
• Universal power adaptor (includes terminal block to power jack converter
• Product Warranty Statement
NOTE: Please notify your sales representative if any of the above items are missing or damaged.
Product Features
• Intel XScale IXP435 533 MHz processor
• On-board 256 MB DDR2 SDRAM (max. 512 MB)
• 16 MB (32 MB for UC-8430) NOR Flash onboard to store OS, 32 MB NAND Flash onboard for data storage
• 8 RS-232/422/485 serial ports
• 4 digital input and 4 digital output channels (12 digital input and 12 digital output channels for UC-8418)
• Dual displays for field site monitoring (UC-8430 only)
• Three 10/100 Mbps Ethernet ports
• 2 USB 2.0 hosts (6 for UC-8430) for mass storage devices
• 8 10/100 Mbps switch ports (UC-8416 only)
• 2 CANbus ports (UC-8418 only)
• CompactFlash socket for storage expansion
• Ready-to-run Linux or Windows CE 6.0 (UC-8430) platform
• DIN-Rail or wall mounting installation
• Robust, fanless design