User`s manual

UC-8410/8416/8418 LX User’s Manual Firmware upgrade procedure
A-2
There are three steps in the recovery process.
A. Configure HyperTerminal for the console port.
B. Download and installation of the TFTP program.
C. Download the firmware and upgrade through HyperTerminal.
If you are familiar with Moxa embedded computers and the firmware upgrade procedure, you may
skip to Step C. However, we suggest that you go through all three steps to ensure the firmware
upgrades properly.
A. Configure HyperTerminal for the Console Port.
1. Unscrew the cover on the back of the UC-8410 series embedded computer.
2. Connect the console port with a console port cable to your PC.
3. Connect your embedded computer to the power source. The power input is located on the rear
panel.
4. Launch a serial communication tool to access your embedded computer. We suggest that you
use HyperTerminal, which is built into Windows XP. Click Start Æ Programs Æ
Accessories Æ Communications and then select HyperTerminal.