User`s manual

UC-8410/8416/8418 LX User’s Manual Programmer’s Guide
5-12
scanf(“%lu”, &duration);
retval = set_din_event(i, lowtohighevent, DIN_EVENT_LOW_TO_HIGH, duration);
} else if ( i == 4 ) { // clear event
printf(“Please keyin the DIN number : “);
scanf(“%d”, &i);
retval=set_din_event(i, NULL, DIN_EVENT_CLEAR, 0);
} else if ( i == 5 ) { // set high data
printf(“Please keyin the DOUT number : “);
scanf(“%d”, &i);
retval=set_dout_state(i, 1);
} else if ( i == 6 ) { // set low data
printf(“Please keyin the DOUT number : “);
scanf(“%d”, &i);
retval=set_dout_state(i, 0);
} else if ( i == 7 ) { // quit
break;
} else if ( i == 8 ) { // show event and duration
printf(“Event:\n”);
for ( j=0; j<MAX_DOUT_PORT; j++ ) {
retval=get_din_event(j, &i, &duration);
switch ( i ) {
case DIN_EVENT_HIGH_TO_LOW :
printf(“(htl,%lu)”, duration);
break;
case DIN_EVENT_LOW_TO_HIGH :
printf(“(lth,%lu)”, duration);
break;
case DIN_EVENT_CLEAR :
printf(“(clr,%lu)”, duration);
break;
default :
printf(“err “ );
break;
}
}
printf(“\n”);
} else {
printf(“Select error, please select again !\n”);
}
switch(retval) {
case DIO_ERROR_PORT:
printf(“DIO error port\n”);
break;
case DIO_ERROR_MODE:
printf(“DIO error mode\n”);
break;
case DIO_ERROR_CONTROL:
printf(“DIO error control\n”);
break;
case DIO_ERROR_DURATION:
printf(“DIO error duratoin\n”);
case DIO_ERROR_DURATION_20MS:
printf(“DIO error! The duratoin is not a multiple of 20 ms\n”);
break;
}
}
return 0;
}