User`s manual

UC-8410/8416/8418-LX User’s Manual Getting Started
2-4
You can proceed with configuring network settings of the target computer when you reach the
bash command shell. Configuration instructions are given in the next section.
ATTENTION
Serial Console Reminder
Remember to choose VT100 as the terminal type. Use cable CBL-4PINDB9F-100, which comes
with the UC-8410/8416/8418, to connect to the serial console port.
Telnet Reminder
When connecting to the UC-8410/8416/8418 over a LAN, you must configure your PC’s
Ethernet IP address to be on the same subnet as the UC-8410/8416/8418 you wish to connect to.
If you do not get connected on the first try, re-check the IP settings, and then unplug and re-plug
the UC-8410/8416/8418’s power cord.