User`s manual

UC-7400 Hardware User’s Manual Introduction
Overview
The Moxa UC-7400 Series of RISC-based ready-to-run embedded computers (referred to
collectively as the UC-7400) includes the UC-7402, UC-7408, UC-7410, and UC-7420. The
UC-7400 features 8 RS-232/422/485 serial ports, dual 10/100 Mbps Ethernet ports, 8 digital input
and 8 digital output channels, a PCMCIA interface for wireless LAN communication, a
CompactFlash slot for flash disk expansion, and USB ports for adding additional memory (such as
a USB Flash disk).
The UC-7400 uses an Intel XScale IXP422 266 MHz RISC CPU. Unlike the X86 CPU, which
uses a CISC design, the IXP-422’s RISC design architecture and modern semiconductor
technology provide the UC-7400 with a powerful computing engine and communication functions,
but without generating a lot of heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM
give you enough memory to run your application software directly on the UC-7400. Since the dual
LAN ports are built into the IXP422 CPU, the UC-7400 makes an ideal communication platform
for network security applications. If your application requires placing the UC-7400 at a site that is
not located near an Ethernet LAN connection, you can connect to the network by attaching a
wireless LAN card to the UC-7400’s PCMCIA port.
Package Checklist
All models of the UC-7400 series are shipped with the following items:
y 1 UC-7400 series embedded computer
y Wall-mounting kit
y DIN-Rail mounting kit
y Quick Installation Guide
y Document & Software CD
y Cross-over Ethernet cable
y CBL-RJ45M9-150: 150 cm, 8-pin RJ45 to DB9 male serial port cable
(does not apply to the UC-7402)
y CBL-RJ45F9-150: 150 cm, 8-pin RJ45 to DB9 female console port cable
y Universal Power Adaptor
y Product Warranty Statement
NOTE: Please notify your sales representative if any of the above items are missing or damaged.
Product Features
y Intel XScale IXP-422 266 MHz processor
y 128 MB RAM, 32 MB Flash ROM onboard
y 8 RS-232/422/485 serial ports (UC-7408/7410/7420 only)
y 8 digital input and 8 digital output channels (UC-7408 only)
y Dual 10/100 Mbps Ethernet ports
y USB 2.0 host for mass storage devices (UC-7420 only)
y PCMCIA, wireless LAN expansion (supports 802.11b/g)
y CompactFlash for storage expansion (UC-7408/7410/7420 only)
y LCM display and keypad for HMI (UC-7410/7412 only)
y Ready-to-run Linux/WinCE 5.0.NET platform
y DIN-Rail or wall mounting installation
y Robust, fanless design
1-2