User`s manual

UC-7400 Hardware User’s Manual Appearance and Dimensions
ATTENTION
Reset to default preserves user’s data
The Reset to default button will NOT format the user directory and erase the user’s data.
Pressing the Reset to default button will only load the configuration file. All files in the /etc
directory will revert to their factory defaults, but other user data will still exist in the Flash ROM.
“Reset to Default” is not supported by UC-7410/7420 hardware versions V1.0
The Reset to default button is not supported by UC-7410/7420 hardware version V1.0. You can
identify the hardware version from the UC-7410/7420’s lower label. You need to contact Moxa
to determine the product’s hardware version. When contacting our customer support team, you
will need to provide the product’s Serial Number (S/N) that is found on UC-7420/7410’s lower
label.
Real Time Clock
The UC-7400’s real time clock is powered by a lithium battery. We strongly recommend that you
do not replace the lithium battery without help from a qualified Moxa support engineer. If you
need to change the battery, contact the Moxa RMA service team.
WARNING
There is a risk of explosion if the battery is replaced by an incorrect type.
2-12