User`s manual

UC-7400 Plus Hardware User’s Manual Introduction
Overview
The Moxa UC-7400 Plus Series (referred to as UC-7400 Plus) includes the UC-7402 Plus,
UC-7408 Plus, UC-7410 Plus, and UC-7420 Plus. These RISC-based ready-to-run embedded
computers are ideal for embedded applications. The UC-7400 Plus embedded computers feature 8
RS-232/422/485 serial ports, dual 10/100 Mbps Ethernet ports, a PCMCIA interface for wireless
LAN communication, a CompactFlash slot for flash disk expansion, and USB ports for adding
additional memory (such as a USB Flash disk).
The UC-7400 Plus uses an Intel XScale IXP425 533 MHz RISC CPU. Unlike the X86 CPU,
which uses a CISC design, the IXP-425’s RISC design architecture and modern semiconductor
technology provide the UC-7400 Plus with a powerful computing engine and communication
functions, but without generating a lot of heat. The built-in 32 MB NOR Flash ROM and 128 MB
SDRAM give you enough memory to run your application software directly on the UC-7400 Plus.
As the dual LAN ports are built right into the IXP425 CPU, the UC-7400 Plus makes an ideal
communication platform for network security applications. If your application requires placing the
UC-7400 Plus at a site that is not located near an Ethernet LAN connection, you can connect to a
wireless network by attaching a wireless LAN card to the UC-7400 Plus’s PCMCIA port.
Package Checklist
All models of the UC-7400 Plus series are shipped with the following items:
y 1 UC-7400 Plus Series Embedded Computer
y Wall-Mounting Kit
y DIN-Rail Mounting Kit
y Quick Installation Guide
y Document & Software CD
y Cross-over Ethernet cable
y CBL-RJ45M9-150: 150 cm, 8-pin RJ45 to male DB9 serial port cable
(NOTE: The UC-7402 Plus model does not come with this accessory.)
y CBL-RJ45F9-150: 150 cm, 8-pin RJ45 to female DB9 console port cable
y Universal Power Adaptor
y Product Warranty Statement
NOTE: Please notify your sales representative if any of the above items are missing or damaged.
Product Features
y Intel XScale IXP425 533 MHz Processor
y On-board 128 MB RAM, 32 MB Flash ROM
y 8 RS-232/422/485 serial ports (UC-7408 Plus/UC-7410 Plus/UC-7420 Plus only)
y Dual 10/100 Mbps Ethernet ports
y USB 2.0 host for connecting mass storage devices (UC-7408 Plus/UC-7420 Plus only)
y PCMCIA, wireless LAN expansion (supports 802.11b/802.11g)
y CompactFlash for storage expansion (UC-7402 Plus/UC-7408 Plus/UC-7420 Plus only)
y LCM display and keypad for HMI (UC-7410 Plus/UC-7420 Plus only)
y Ready-to-run Linux platform
y DIN-Rail or wall mounting installation
y Robust, fanless design
1-2