User`s manual

UC-7400-CE User’s Manual Introduction
UC-7400 Product Features
y Intel XScale IXP-422 266 MHz Processor
y On-board 128 MB RAM, 32 MB Flash ROM
y Eight RS-232/422/485 serial ports
y 8 digital input channels and 8 digital output channels (UC-7408 only)
y Dual 10/100 Mbps Ethernet ports
y USB 2.0 host for mass storage devices (UC-7420 only)
y PCMCIA, wireless LAN expansion (supports 802.11b/802.11g)
y CompactFlash for storage expansion (UC-7420/7408 only)
y LCM display and keypad for HMI (UC-7420/7410 only)
y Ready-to-run WinCE 5.0 .NET platform
y DIN-Rail or wall mounting installation
y Robust, fanless design
UC-7420/UC-7410 UC-7408
The UC-7420-CE and UC-7408-CE have a PCMCIA slot and CompactFlash interface for wireless
communication and flash storage expansion. In addition, the UC-7420-CE integrates two USB
hosts, a USB device port, and an LCM display for mass storage capability and other uses.
The UC-7408-CE, which does not have an LCM or USB port, features 8 digital input channels and
8 digital output channels, making it an ideal but cost-effective embedded computer for data
acquisition systems.
The UC-7410-CE is a low-cost, stripped-down version of the UC-7420-CE designed for
smaller-scale applications. As such the UC-7410-CE does not have a PCMCIA slot, CompactFlash,
or USB port. Please see the comparison table below for more details about these products.
1-3