User`s manual

Industrial Networking Solutions
15-15
[e-mail]
www.moxa.com
15
Embedded Computers for Communication >
V466 Series
Rear view
Hardware Specifi cations
RS-232
Serial Ports x 2
RS-232/422/485
Serial Ports x 2
Power Switch
Power Input
9-36 VDC
10/100 Mbps Ethernet Switch Ports x 8
Computer
CPU: AMD Geode LX 800@0.9W processor with 128K L2 Cache, 500
MHz
OS (pre-installed): Windows CE 6.0 or Windows XP Embedded
System Chipset: AMD CS5536
BIOS: 4 mega-bit Flash BIOS, supporting Plug & Play, APM 1.2, ACPI
1.0
SRAM: 256 KB, battery backup
FSB: 400 MHz
System Memory: 200-pin SO-DIMM socket with built-in 256 MB
(CE) or 512 MB (XPe) DDR, supporting DDR400 up to 1 GB
Expansion Bus: PC/104-Plus onboard
USB: USB 2.0 compliant hosts x 4, type A connector, supports
system boot up
Storage
Built-in: 256 MB (CE) or 1 GB (XPe) industrial DOM for OS
Storage Expansion: CompactFlash socket
Other Peripherals
KB/MS: 1 PS/2 interface supporting standard PS/2 keyboard and
mouse through Y-type cable
Audio: AC97 audio, with speaker-out interface
Display
Graphics Controller: CPU integrated 2D graphics
Display Interface: CRT interface for VGA output
Ethernet Interface
LAN: 4 auto-sensing 10/100 Mbps ports (RJ45)
Switch Ports: Built-in 8-port Ethernet switch (10/100 Mbps,
unmanaged)
Controller: Realtek RTL8100CL
Magnetic Isolation Protection: 1.5 KV built-in
Serial Interface
Serial Standards:
• 2 RS-232 ports (DB9 male)
• 2 RS-232/422/485 ports, software selectable (DB9 male)
ESD protection: 15 KV for all signals
Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data
direction control) for RS-485
Baudrate: 50 bps to 921.6 Kbps (non-standard baudrates supported;
see user’s manuals for details)
Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
LEDs
System: Power, Battery, Storage
LAN: 10M/Link x 4, 100M/Link x 4 (on connector), Switch x 8
Switches and Buttons
Power Switch: on/off
Reset Button: For warm reboot
Physical Characteristics
Housing: Aluminum, EPIC form factor
Weight: 1.32 kg
Dimensions:
Without ears: 223 x 120.5 x 57 mm (8.78 x 4.74 x 2.24 in)
With ears: 253 x 120.5 x 57 (9.96 x 4.74 x 2.24 in)
Mounting: DIN-Rail, wall
Environmental Limits
Operating Temperature:
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Operating Humidity: 5 to 95% RH
Storage Temperature:
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Power Requirements
Input Voltage: 9 to 36 VDC (3-pin terminal block for V+, V-, SG)
Power Consumption: 26 W
• 730 mA @ 36 VDC
• 1080 mA @ 24 VDC
• 2820 mA @ 9 VDC)
Regulatory Approvals
EMC: CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3,
EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A), CCC
(GB9254, GB 17625.1)
Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), LVD, CCC
(GB4943)
Green Product: RoHS, WEEE
Reliability
Alert Tools: Built-in buzzer and RTC (real-time clock) with battery
backup
Automatic Reboot Trigger: Built-in WDT (watchdog timer)
supporting 1-255 level time interval system reset, software
programmable
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Note: The Hardware Specifi cations apply to the embedded computer unit itself,
but not to accessories. In particular, the wide temperature specifi cation does
not apply to accessories such as the power adaptor and cables.