User`s manual
Table Of Contents
- 1. Introduction
- 2. Getting Started
- Starting Your UC-7400-CE Computer
- Resetting Your UC-7400-CE Computer
- Operating UC-7400-CE Computer Via Serial Console
- Changing the Network Settings
- Operating Your UC-7400-CE Computer Via Telnet Client
- User/Group Management
- Adjusting System Time and RTC Time
- Starting and Stopping Services
- Troubleshooting Network Connectivity
- Simple Network Management Protocol (SNMP)
- 3. Web-based Management System
- 4. Application Development
- 5. Programming Examples
- A. Operating Programmable Function Keys and LCM
- B. Firmware Upgrade Procedure
- C. Service Information
B
B
Appendix B Firmware Upgrade Procedure
To upgrade the UC-7400-CE firmware, you can use the upfirm utility. This utility on the software
CD; you can also download it from the MOXA Download Center, URL is listed below.
MOXA Download Center
http://web4.moxa.com/support/download_center.asp
For firmware upgrade procedure, please refer to the following steps.
1. You can use FTP function or File Manager function of Web-based Management System
described in Chapter 3 to download this upfirm utility onto the onboard Flash of UC-7400-CE
2. Enter the console of UC-7400-CE via “telnet” or “serial console”.
3. Execute the “upfirm” utility. Press “y” to continue the process.