User`s manual

3
3
Chapter 3 Web-based Management System
Note: Internet Explorer 5.5 and above is required to use the web based management system.
The UC-7400-CE series ready-to-run embedded computers are network-centric platforms and are
designed to serve as excellent front-ends for data acquisition and industrial control. Due to the
distributed characteristics of the devices, that these computers control, they often reside in harsh
areas as the devices themselves and are away from system administrators. To manage these
computers, operations such as networking/server configuration, file management, and process
(thread) monitoring/control become a critical area to consider.
To resolve these management issues and accordingly reduce the toil of system administration, a
web-based management system is installed into the UC-7400-CE computer. This system
incorporates often-used features into CGI pages and categorizes them on a menu bar.
Before operating the system, please make sure you have a network connection from your PC to the
target computer and can open an Internet browser at your PC after the connection. Then, use the IP
address of the target computer as a home page URL. After the main page comes out, click on
Web-Based Management.
Provide your authentication data including user ID and password into the corresponding fields of
the prompt (case sensitive) and then hit the enter key to request access to the management system.
The system checks your data with the users previously defined in the computer and then
determines the validity of your logon.
The default User ID and Password are as follows:
User ID: admin
Password: admin
The following topics are covered in this chapter:
 System Information
 Netowrking/Server Configuration
 Process (Thread) Monitoring/Control
 Launching Processes Automatically
 Services Monitoring/Control
 Binary/Text File Management