User`s manual

UC-7112-LX Plus Software User’s Manual Managing Communications
4-25
the second argument of ifconfig in the configuration file.
3. Check the routing table after you run the OpenVPN programs, by typing the command:
# route
Destination Gateway Genmsk Flags Metric Ref Use Iface
192.168.4.174 * 255.255.255.255 UH 0 0 0 tun0
192.168.4.0 192.168.4.174 255.255.255.0 UG 0 0 0 tun0
192.168.2.0 * 255.255.255.0 U 0 0 0 eth1
192.168.8.0 * 255.255.255.0 U 0 0 0 eth0