User`s manual

UC-7112-LX Plus Software User’s Manual Managing Communications
4-24
Setup 3: Routed IP
1. Set up four machines as shown in the following diagram:
OpenVPN A
OpenVPN B
Host A
LAN1: 192.168.2.171
Host B
LAN1: 192.168.4.172
LAN1: 192.168.8.174
LAN1: 192.168.2.173
local net
local net
tenretnItenretnI
LAN2: 192.168.4.174
LAN2: 192.168.8.173
2. Create a configuration file named “A-tun.conf” and an executable script file named
“A-tun.sh”.
# point to the peer
remote 192.168.8.174
dev tun
secret /etc/openvpn/secrouter.key
cipher DES-EDE3-CBC
auth MD5
tun-mtu 1500
tun-mtu-extra 64
ping 40
ifconfig 192.168.2.173 192.168.4.174
up /etc/openvpn/A-tun.sh
#--------------------------------- Start-----------------------------
#!/bin/sh
# value after “-net” is the subnet behind the remote peer
route add -net 192.168.4.0 netmask 255.255.255.0 gw $5
#--------------------------------- end ------------------------------
Create a configuration file named B-tun.conf and an executable script file named B-tun.sh on
OpenVPN B:
remote 192.168.8.173
dev tun
secret /etc/openvpn/secrouter.key
cipher DES-EDE3-CBC
auth MD5
tun-mtu 1500
tun-mtu-extra 64
ping 40
ifconfig 192.168.4.174 192.168.2.173
up /etc/openvpn/B-tun.sh
#--------------------------------- Start----------------------------
#!/bin/sh
# value after “-net” is the subnet behind the remote peer
route add -net 192.168.2.0 netmask 255.255.255.0 gw $5
#--------------------------------- end -----------------------------
Note that the parameter “ifconfig” defines the first argument as the local internal interface and
the second argument as the internal interface at the remote peer.
Note that $5 is the argument that the OpenVPN program passes to the script file. Its value is