User`s manual

UC-7112-LX Plus Software User’s Manual Managing Embedded Linux
3-8
xx: a number between 00-99. Smaller numbers have a higher priority.
RUNFILE: the file name.
192.168.3.127 – PuTTY
root@Moxa:/ect/rc.d/rc3.d# ls
S19nfs-common S25nfs-user-server S99showreadyled
S20snmpd S55ssh
S24pcmcia S99rmnologin
root@Moxa:/ect/rc.d/rc3.d# ln –s /root/tcps2-release S60tcps2
root@Moxa:/ect/rc.d/rc3.d# ls
S19nfs-common S25nfs-user-server S99rmnologin
S20snmpd S55ssh S99showreadyled
S24pcmcia S60tcps2
root@Moxa:/etc/rc.d/rc3.d#
KxxRUNFILE stands for
K: start the run file while linux shuts down or halts.
xx: a number between 00-99. Smaller numbers have a higher priority.
RUNFILE: the file name.
To remove the daemon, remove the run file from the
/etc/rc.d/rc3.d directory by using the
following command:
#rm –f /etc/rc.d/rc3.d/S60tcps2
Adjusting the System Time
Setting the Time Manually
The UC-7112-LX Plus has two time settings. One is the system time, and the other is the RTC
(Real Time Clock) time kept by the UC-7112-LX Plus’s hardware. Use the
#date command to
query the current system time or set a new system time. Use
#hwclock to query the current RTC
time or set a new RTC time.
Use the following command to query the system time:
#date
Use the following command to query the RTC time:
#hwclock
Use the following command to set the system time:
#date MMDDhhmmYYYY
MM = Month
DD = Date
hhmm = hour and minute
YYYY = Year
Use the following command to set the RTC time:
#hwclock –w
Write current system time to RTC