User`s manual

UC-7112 Plus/7112/7110 Hardware User’s Manual Hardware Connection Description
3-4
Connecting to a Serial Device
Connect the serial cable between the UC-71xx and the serial device(s).
The two serial ports (P1 and P2) use male DB9 connectors, and can be configured for
RS-232/422/485 by software. The pin assignments are shown in the following table:
Male DB9 Port RS-232/422/485 Pinouts
12345
6789
Pin RS-232 RS-422
RS-485
(4-wire)
RS-485
(2-wire)
1 DCD TxDA(-) TxDA(-) ---
2 RxD TxDB(+) TxDB(+) ---
3 TxD RxDB(+) RxDB(+) DataB(+)
4 DTR RxDA(-) RxDA(-) DataA(-)
5 GND GND GND GND
6 DSR --- --- ---
7 RTS --- --- ---
8 CTS --- --- ---
Serial Console Port
The serial console port is a 4-pin pin-header RS-232 port. It is designed for serial console
terminals, which are useful for identifying the UC-71xx’s boot up message.
Serial Console Port & Pinouts Serial Console Cable
4
3
2
1
Pin Signal
1 TxD
2 RxD
3 NC
4 GND