Installation guide

- 16 -
Interface
Fast Ethernet
Front cabling, M12 connector, 10/100BaseT(X)
auto negotiation speed, F/H duplex mode, and
auto MDI/MDI-X connection
Gigabit Ethernet
Down cabling, M12 connector, 1000BaseLSX
Console Port
M12 A-coding 5-pin male connector
System LED Indicators
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL
Port LED Indicators
10/100M (Fast Ethernet port), 1000M (Gigabit
Ethernet port)
Alarm Contact Two relay outputs in one M12 A-coding 5-pin
male connector with current carrying capacity of
3 A @ 30 VDC or 3 A @ 240 VAC
Rotary Switches
For setting the last 3 digits of the IP address
Power Requirements
Input Voltage
LV: 12/24/36/48 VDC (8.4 to 60 VDC)
Input Current
0.507 A @ 24 VDC
Connection
M23, 6-pin male connector
Overload Current
Protection
Present
Reverse Polarity
Protection
Present
Physical Characteristics
Housing
Metal, IP54 protection (with protective caps on
unused ports)
Dimensions (W × H × D) 204.3 x 185 x 76 mm (8.04 x 7.28 x 2.99 in)
Weight
1700 g
Installation
Panel mounting, DIN-Rail mounting
(with optional kit)
Environmental Limits
Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Humidity
5 to 95% (non-condensing)
Regulatory Approvals
Safety
UL508 (Pending)
Rail Traffic
EN50155, EN50121-3-2, EN50121-4
Road Traffic
NEMA TS2 (Pending), e-Mark (Pending)
EMI
FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), exceeds level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12
Shock
IEC61373
Freefall
IEC60068-2-32
Vibration
IEC61373
Note: Please check Moxa’s website for the most up-to-date certification
status.
WARRANTY
5 years
Details: See www.moxa.com/warranty