Installation guide

- 8 -
ATTENTION
This product is intended to be mounted to a well
-grounded
mounting surface such as a metal panel.
Connecting the Power Supply
The M12 A coded 5 pin and M23 6 pin male connector on the
TN-5308-LV/MV front panel is used for the DC power input. You have to
prepare a power cord with M12/M23 A-coded 5-pin female connector to
connect the switch to the DC power input.
Pinouts for the power input port on the TN-5308-LV
Pinouts for the power input port on the TN-5308-MV
STEP 1: Plug your power cord connector to the power input port of the
TN-5308 switch.
STEP 2: Screw the nut on your power cord connector to the power input
connector on the switch to ensure a tight connection.
ATTENTION
Before connecting the TN
-
5308 to the DC power input, make sure
the DC power source voltage is stable.