Specifications

Industrial Networking Solutions
4-29
[e-mail]
www.moxa.com
4
Industry-specific Ethernet Switches >
PT-7324 Series
PT-7324 Series
Introduction
The PowerTrans PT-7324 smart Ethernet switch is designed to meet the
demands of power substation automation systems (IEC 61850-3, IEEE
1613), traffic control systems (NEMA TS2), and railway applications
(EN50121-4). The PT-7324 is also equipped with smart “Class of
Service” features suitable for multimedia applications, and port-based
Port-based VLAN to ease network planning•
IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic
›
control systems), and EN50121-4 (railway applications) compliant
Port-based VLAN to enhance security/network performance ›
802.1p priority queues, port-based QoS ›
Smart web-based management makes configuration easy ›
Universal power supply range, 12/24/48 VDC or 110/220 VDC/VAC ›
-40 to 85°C operating temperature range ›
Smart Rackmount Ethernet Switch System, PT-7324
Specifications
2
4
6 8
1
3
5
7
10
12 14
16
9
11
13
15
18 20
22
17 19 2 1
PT-73 24M1
LNK/ACT SPEED
FAULT
STAT PWR1 PWR2
MODE
FDX/HDX
19 1
20
218
22
17
21
8
7
6
5
2
1
4
3
16
15
14
13
10
9
12
11
M1
Slot 1
IEC 61850-3 22+2G-port Gigabit smart rackmount Ethernet switches
VLAN features that can be used to segment your network without
being restricted by physical connections. If you do not want to receive
too many broadcast packets, the broadcast storm filtering feature will
discard broadcast packets if the number of such packets exceeds a
threshold in a preset period of time.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for Flow Control
IEEE 802.1p for Class of Service
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues: 2
Max. Number of Available VLANs: 24
Interface
RJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto
negotiation speed, F/H duplex mode and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX (SC/ST connector) or 1000BaseSFP slots
LED Indicators: STAT, PWR1, PWR2, FAULT, LNK/ACT, FDX/HDX,
SPEED
Alarm Contact: 1 relay output with current carrying capacity of 3 A @
30 VDC or 3 A @ 240 VAC
Note: Slot 1 for a 2-port PM-7200 Gigabit Ethernet combo module, or 1 or
2-port PM-7200 fast Ethernet module.
Power Requirements
Input Voltage:
•12/24/48VDC(9to60V)
•110/220VDC/VAC(88to300VDCand85to264VAC)
Input Current: (all ports are equipped with fiber)
•Max.0.68A@24VDC
•Max.0.35A@48VDC
•Max.0.17/0.11A@110/220VDC
•Max.0.33/0.23A@110/220VAC
Overload Current Protection: Present
The certification logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifications” below.
Features and Benefits
Connection: 10-pin terminal blocks
Reverse Polarity Protection: Present
Physical Characteristics
Housing: IP30 protection
Dimensions: 440 x 44 x 254 mm (17.32 x 1.73 x 10.00 in)
Weight: 3300 g
Installation: 19’’ rack mounting
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)
EMI: FCC Part 15, CISPR (EN55022) class A
Power Automation: IEC 61850-3, IEEE 1613
Maritime: DNV (Pending), GL (Pending)
Traffic Control: NEMA TS2
Rail Traffic: EN50155/EN50121-4
Note: Please check Moxa’s website for the most up-to-date certification status.
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
802.1p priority queues and port-based QoS to increase determinism•
Broadcast storm filtering•