Specifications

4-26
www.moxa.com
[e-mail]
4
Industrial Ethernet Solutions
Industry-specific Ethernet Switches >
PT-7710 Series
IEC 61850-3 8+2G-port Gigabit modular managed rackmount
Ethernet switches
IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic ›
control systems), and EN50121-4 (railway applications) compliant
Turbo Ring and RSTP/STP for Ethernet redundancy ›
Universal power supply range, 12/24/48 VDC or 110/220 VDC/VAC ›
Modular design lets you choose from a variety of media ›
combinations
-40 to 85°C operating temperature range ›
PT-7710 Series
Introduction
The PowerTrans PT-7710 is designed to meet the demands of power
substation automation systems (IEC 61850-3, IEEE 1613), traffic
control systems (NEMA TS2), and railway applications (EN50121-4).
The PT-7710’s Gigabit and fast Ethernet backbone, redundant ring,
and 12/24/48 VDC dual redundant power supplies or 110/220 VDC/
IPv6 Ready logo awarded (IPv6 Logo Committee certified)•
IEEE 1588 PTP (Precision Time Protocol) for precise time •
synchronization of networks
DHCP Option 82 for IP address assignment with different policies•
Modbus/TCP industrial Ethernet protocol supported •
Turbo Ring and RSTP/STP (IEEE 802.1w/D)•
IGMP snooping and GMRP for filtering multicast traffic from •
industrial Ethernet protocols
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP protocol to ease •
network planning
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism •
IEEE 802.3ad, LACP for optimum bandwidth utilization•
Modular Rackmount Ethernet Switch System, PT-7710
Specifications
M1
M2
PT-7710
Slot 1 Slot 2
VAC power supplies increase the reliability of the communications and
reduce cabling and wiring costs. The modular design of the PT-7710
makes network planning easy, and allows greater flexibility by letting
you install up to 2 Gigabit ports and 8 fast Ethernet ports, or 10 fast
Ethernet ports.
IEEE 802.1X, HTTPS, and SSH to enhance network security•
SNMPv1/v2c/v3 for different levels of network management•
RMON for efficient network monitoring and proactive capability•
Bandwidth management prevents unpredictable network status •
Lock port to limit access to authorized MAC addresses only•
Port mirroring for online debugging•
Automatic warning by exception through email, relay output•
Automatic recovery of connected device’s IP addresses•
Line-swap fast recovery•
Configurable by web browser, Telnet/serial console, Windows •
utility, and ABC-01 automatic backup configurator
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP,
RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, LLDP, Modbus/
TCP, IEEE 1588 PTP, IPv6
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
The certification logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifications” below.
Features and Benefits