Specifications
Industrial Networking Solutions
3-55
info@moxa.com
www.moxa.com
3
Industrial Ethernet Switches >
IKS-6324 Series
IKS-6324 Series
Introduction
The IKS-6324 industrial rackmount Ethernet switches are designed
to meet the demands of industrial application networks such as
traffic control systems (NEMA TS2), and maritime applications (DNV/
GL). The IKS-6324 is a 24-port industrial 19” rackmount Ethernet
switch series that provides a rugged and economical solution for
your industrial Ethernet connections. Up to two fast Ethernet fiber
optic ports and combo Gigabit Ethernet TP or fiber optic ports can be
Meets UL 60950-1, NEMA TS2, EN50155/EN50121-4, and DNV/ GL
›
certifi cations
Universal power supply range, 12/24/48 VDC or 110/220 VDC/VAC ›
Redundant dual 12/24/48 VDC power inputs ›
-40 to 75˚C operating temperature range ›
Unmanaged Rackmount Ethernet Switch
System, IKS-6324
Specifi cations
2
4
68
1
3
5
7
10
12 14
16
9
11
13
15
18 20
22
17 19 21
M1
LNK/ACT SPEED
FAULT
STAT PWR1 PWR2
MODE
FDX/HDX
19 1
20
218
22
17
21
8
7
6
5
2
1
4
3
16
15
14
13
10
9
12
11
M1
IKS-6324
Slot 1
22+2G-port Gigabit unmanaged Ethernet switches
chosen to make the construction of a reliable Ethernet network easy.
A universal power supply range of 24/48 VDC or 110/220 VDC/VAC
give users greater flexibility in choosing power inputs. The Ethernet
switches comply with UL standards and support a wide operating
temperature range of -40 to 75°C. All models undergo a 100% burn-in
test to ensure that they fulfill the special needs of industrial automation
control applications.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for Flow Control
Flow Control: IEEE 802.3x fl ow control, back pressure fl ow control
Interface
Fiber Ports: 100BaseFX (SC/ST connector) or 1000BaseSFP slots
RJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto
negotiation speed, F/H duplex mode and auto MDI/MDI-X connection
LED Indicators: STAT, PWR1, PWR2, FAULT, LNK/ACT, FDX/HDX,
SPEED
Note: Slot 1 is for a 2-port PM-7200 Gigabit Ethernet combo module, or 1 or
2-port PM-7200 fast Ethernet module. See page 4-31 for details.
Power Requirements
Input Voltage: 12/24/48 VDC (9 to 60 V), or 110/220 VDC/VAC (88 to
300 VDC and 85 to 264 VAC)
Input Current: (all ports are equipped with fi ber)
• Max. 0.68 A @ 24 VDC
• Max. 0.35 A @ 48 VDC
• Max. 0.17/0.11 A @ 110/220 VDC
• Max. 0.33/0.23 A @ 110/220 VAC
Overload Current Protection: Present
Connection: 10-contact terminal block
Reverse Polarity Protection: Present
Physical Characteristics
Housing: IP30 protection
Dimensions: 440 x 44 x 254 mm (17.32 x 1.73 x 10.00 in)
Weight: 4300 g
Installation: 19’’ rack mounting
Environmental Limits
Operating Temperature: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)
EMI: FCC Part 15, CISPR (EN55022) class A
Maritime: DNV (Pending), GL (Pending)
Traffi c Control: NEMA TS2
Rail Traffi c: EN50155/EN50121-4
Note: Please check Moxa’s website for the most up-to-date
certifi cation status.
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.