Specifications

Industrial Networking Solutions
3-33
info@moxa.com
www.moxa.com
3
Industrial Ethernet Switches >
EDS-510A Series
EDS-510A Series
Introduction
The EDS-510A Gigabit managed redundant Ethernet switch is equipped
with up to 3 Gigabit Ethernet ports, making it ideal for building a
Gigabit Turbo Ring, but leaving a spare Gigabit port for uplink use. The
Ethernet redundant Turbo Ring (recovery time < 20 ms) and RSTP/STP
IPv6 Ready logo awarded (IPv6 Logo Committee certifi ed)
IEEE 1588 PTP (Precision Time Protocol) for precise time
synchronization of networks
DHCP Option 82 for IP address assignment with different policies
Modbus/TCP industrial Ethernet protocol supported
IEC 61850 GOOSE messaging compliance
Turbo Ring (recovery time < 20 ms at full load) and RSTP/STP
(IEEE 802.1w/D)
IGMP snooping and GMRP for fi ltering multicast traffi c
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
planning
2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet
port for uplink solution
Turbo Ring (recovery time < 20 ms), RSTP/STP (IEEE 802.1w/D) for
Ethernet redundancy
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON
supported
IEEE 802.1X, HTTPS, and SSH to enhance network security
ABC-01 (Automatic Backup Confi gurator) for system confi guration
backup
Specifi cations
7+3G-port Gigabit managed Ethernet switches
(IEEE 802.1w/D) can increase system reliability and the availability of
your network backbone. The EDS-510A series is designed especially
for communication demanding applications such as process control,
shipbuilding, ITS, and DCS systems, which can benefit from a scalable
backbone construction.
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
Port Trunking for optimum bandwidth utilization
IEEE 802.1X, HTTPS, and SSH to enhance network security
SNMPv1/v2c/v3 for different levels of network management
RMON for effi cient network monitoring and proactive capability
Bandwidth management prevents unpredictable network status
Lock port function for blocking unauthorized access based on MAC
address
Port mirroring for online debugging
Automatic warning by exception through e-mail, relay output
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX/EZX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3,
DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP,
SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, SNMP
Inform, Modbus/TCP, LLDP, IEEE 1588 PTP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x fl ow control, back pressure fl ow control
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Interface
Fiber Ports: 1000BaseSFP slot
RJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto
negotiation speed
Console Port: RS-232 (RJ45 connector)
DIP Switches: Turbo Ring, Master, Coupler, Reserve
LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 1000M
(Gigabit port), MASTER, COUPLER
Alarm Contact: 2 relay outputs with current carrying capacity of 1 A
@ 24 VDC
Features and Benefi ts