Specifications

3-24
www.moxa.com
[e-mail]
Industrial Ethernet Solutions
Industrial Ethernet Switches >
EDS-608 Series
3
EDS-608 Series
Introduction
The versatile modular design of the compact EDS-608 Ethernet
switch allows users to combine fiber and copper modules to create
switch solutions suitable for any automation network. The EDS-608’s
modular design lets you install up to 8 fast Ethernet ports, and the
advanced Turbo Ring (recovery time < 20 ms) technology and RSTP/
STP (IEEE 802.1w/D) helps increase the reliability and availability of
Modular design lets you choose from a variety of media
›
combinations
Turbo Ring and RSTP/STP (IEEE 802.1w/D) for Ethernet ›
redundancy
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, ›
RMON supported
IEEE 802.1X, HTTPS, and SSH to enhance network security ›
-40 to 75˚C operating temperature (T models) ›
Specifi cations
8-port compact modular managed Ethernet switches
IPv6 Ready logo awarded (IPv6 Logo Committee certifi ed)•
IEEE 1588 PTP (Precision Time Protocol) for precise time •
synchronization of networks
DHCP Option 82 for IP address assignment with different policies•
Modbus/TCP industrial Ethernet protocol supported •
Turbo Ring (recovery time < 20 ms at full load) and RSTP/STP •
(IEEE 802.1w/D)
IGMP snooping and GMRP for fi ltering multicast traffi c•
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network •
planning
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism•
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100Base FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP,
RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, LLDP, Modbus/
TCP, IEEE 1588 PTP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x fl ow control, back pressure fl ow control
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
Interface
Fast Ethernet: 2 slots for any combination of 4-port interface
modules, 10/100BaseT(X) or 100BaseFX
System LED Indicators: PWR1, PWR2, FAULT, MASTER, COUPLER
Module LED Indicators: 10/100M for TP port, 100M for Fiber port
Alarm Contact: 1 relay output with current carrying capacity of 1 A @
24 VDC
Digital Inputs: 1 input with the same ground, but electrically isolated
from the electronics.
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA
your industrial Ethernet network. Models with an extended operating
temperature range of -40 to 75°C are also available. The EDS-608
supports several reliable and intelligent functions, including QoS,
IGMP snooping/GMRP, VLAN, Port Trunking, SNMPv1/v2c/v3, IEEE
802.1X, HTTPS, SSH, and RMON, making the Ethernet switches
suitable for any harsh industrial environment.
Features and Benefi ts
Port Trunking for optimum bandwidth utilization•
IEEE 802.1X, HTTPS, and SSH to enhance network security•
SNMPv1/v2c/v3 for different levels of network management•
RMON for effi cient network monitoring and proactive capability•
Bandwidth management prevents unpredictable network status•
Lock port function for blocking unauthorized access based on MAC •
address
Port mirroring for online debugging•
Automatic warning by exception through e-mail, relay output•
Digital inputs to integrate sensors and alarms with IP networks•
Coming Soon
The certifi cation logos shown here apply to some or all of the products in this
section. For details, see “Regulatory Approvals” under “Specifi cations” below.