Specifications

3-12
www.moxa.com
[e-mail]
Industrial Ethernet Solutions
Industrial Ethernet Switches >
Introduction to Managed Ethernet Switches
3
Replacing Faulty Devices
To reduce the effort required to configure IP addresses, Moxa’s
managed Ethernet switches support DHCP/BootP server and RARP
protocols, which are used to automatically configure the IP addresses
of Ethernet-enabled devices.
PLC
IP
DHCP request
IP
DHCP request
DHCP server
PLC
IP
New Device
In addition, Moxa’s managed Ethernet switches can also play the
role of DHCP relay agent (with Option 82 support) to forward DHCP
requests and provide information details (such as the slot ID, port
number, and VLAN ID) for the authentication of DHCP servers.
The Moxa SNMP OPC Server Pro software package can convert
SNMP into OPC format. The vertical integration of SNMP management
information into existing OPC-based SCADA packages gives the
customer the ability to establish an Ethernet network management
application that is integrated with existing visualization and control
applications.
Moxa’s managed Ethernet switches can be configured easily over the
network by web browser, Telnet console, or a Windows utility provided
by Moxa. In addition, it is simple to back up configuration parameters
and update firmware in the managed Ethernet switches with these
user-friendly tools.
Easy Browser-based Confi guration
ABC-01 Provides a Seamless Backup Solution
SAVE
LOAD
Network Management with Moxa’s SNMP OPC Server Software
Moxa’s ABC-01 is designed to save and load the configuration of a
Moxa managed Ethernet switch. Simply plug the ABC-01 into the
Ethernet switch’s RS-232 console port, and then use the Ethernet
switch’s HMI utility to save or load the configuration. The ABC-01
makes it easy to manage your network, particularly when you need
to back up or replace an Ethernet switch. You can quickly reinstall a
substitute Ethernet switch (of the same model) or recover the entire
system configuration if an Ethernet switch failure occurs.
ABC-01
ABC-01
Flexible Fast Ethernet Module
Up to 24 Fast Ethernet ports can be installed in the EDS-728/828 and
IKS-6726 Ethernet switches. Select from a variety of Fast Ethernet
interface modules wtih a combination of 10/100BaseT(X) (RJ45
connectors) and 100BaseFX (single/multi-mode, SC/ST connectors)
ports. Long-haul single mode optical fiber can be used to provide 100
Mbps transmission over a distance of 40 km or 80 km.
Innovative Modular Design
Scalable Gigabit Modular Solution
A bandwidth 100 Mbps is not enough to meet the requirements posed
by industrial Ethernet applications that involve transmitting both voice
and video. The EDS-728/828 and IKS-6726 Ethernet switches, which
support Gigabit Ethernet ports and Gigabit Turbo Ring, can be used to
create a reliable, high performance network backbone. Select Gigabit
modules that meet your current needs, or to set up your system for
future requirements.
Modular Design, Maximum Flexibility