User manual

Test Report ------------------------------------------------------------------------------- 20/48
Report No.: M47ET060805 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: [phone], Fax: [phone]
Test levels: (Apply Level 2 and Level 3)
1a — Contact discharge 1b — Air discharge
Level Test voltage
(kV)
Level Test voltage
(kV)
1 2 1 2
2 4 2 4
3 6 3 8
4 8 4 15
X Special X Special
NOTE: “X” is an open level. The level has to be specified in the dedicated equipment specification. If
higher voltages than those shown are specified, special test equipment may be needed.
Test Voltage: 4KV contact discharge
8KV air discharge
Indirect Discharges: HCP
VCP
Polarity: Positive
Negative
Test mode: Ref. Test method of Chapter 1