User manual

Test Report ------------------------------------------------------------------------------- 19/48
Report No.: M47ET060805 (ETSI EN 301 489)
Training Research Co., Ltd., TEL: [phone], Fax: [phone]
Chapter 4 Electrostatic Discharges Immunity Test
ESD Test information:
Test setup: Shielded room, According to EN 61000-4-2
Test setup for table-top equipment at laboratory tests:
0.1 m
Ground Reference Plane
Wooden table H=0.8m
470kohm
Resistor
Insulation
Power Supply
VPC
0.5m X 0.5m
Horizontal coupling place
1.6m X 0.8m
Typical position for
indirect discharge to VCP
Typical position for
indirect discharge
Typical position for
indirect discharge to HCP
EUT
0.1 m