Installation guide

64
MOXA Embedded Computers
UC-7420/UC-7410
UC-7420/UC-7410 products are RISC-based ready-to-run
embedded computers for your embedded applications. The
UC-7420/UC-7410 embedded computers feature eight
RS-232/422/485 serial ports, a PCMCIA interface for wireless
LAN communication, CompactFlash, and USB ports for mass
storage disk expansion, making UC-7420/7410 ideal for your
embedded applications.
The pre-installed Linux/WinCE OS provides an open, standard
software operating system for your software program
development. This means that software written for a desktop
PC can be easily ported to the UC-7420/UC-7410 platform by
using an open, common development tool, without needing
to modify the software code. All the software you develop for
your own applications can be stored on the UC-7420/UC-7410’s
Flash memory. Using the UC-7420/UC-7410, you can easily
build a control system with a distributed architecture, based
on embedded technologies.
Overview
RISC-based Ready-to-Run Embedded Computer with 8 Serial
Ports, Dual LANs, USB, PCMCIA, CompactFlash
UC-7420 Appearance
CF x 1
10/100 Mbps Ethernet 1
10/100 Mbps Ethernet 2
RS-232 PPP/Console
USB 1.1 Client x 1,
mini B connector
USB 2.0 Host x 2,
A-type connector
PCMCIA x 1
Keypad Buttons
Graphics LCM
128 x 64 dots
RS-232/422/485 x 8, RJ45
Front View
PIN RS-232 RS-422 RS-485
1 DSR --- ---
2 RTS TxD+ ---
3 GND GND GND
4 TxD TxD- ---
5 RxD RxD+ Data+
6 DCD RxD- Data-
7 CTS --- ---
8 DTR --- ---
Intel XScale IXP-422/425, 266/533 MHz processor
128 MB RAM on-board, 32 MB flash disk
8 RS-232/422/485 serial ports
Dual 10/100 Mbps Ethernet for network redundancy
USB 2.0 Host
CompactFlash socket for storage expansion
PCMCIA supports WLAN, GPRS, UMTS, HSDPA
LCM display and keypad for HMI
Ready-to-run Linux / WinCE 5.0 platform
DIN-rail or wall-mount installation
Robust, fanless design
12 to 48 VDC Power Input
Pin Assignment
Back View
1
8
Features
Serial Port, RJ45 Connector
UC-7420/UC-7410