Installation guide

www.moxa.com e-mail: [e-mail]
33
Ready-to-Run, Reliable, Wide Temperature
Hardware Specifications
System
CPU: MOXA ART ARM9 32-bit RISC CPU, 192 MHz
DRAM: 64 MB
Flash: 16 MB
Storage Expansion: SD socket x 1 for storage expansion
USB: USB 2.0 Host x 2
Relay Output:Form C, SPDT x 1
Normal Switching Capacity: 2A @30 VDC
Switching Power: 60W max.
Switching Voltage: 220 VDC max.
Switching Current: 2A max.
Operating Time: 4 ms @ 20°C
Initial Contact Resistance: 100 mohm max.
Console Port: RS-232 x 1 (TxD, RxD, GND), 4-pin header
output
Button:Reset button x 1, support “Reset to Factory Default”
Others: RTC, buzzer, Watchdog Timer
OS: Built-in Embedded Linux with MMU support
WLAN Communication
Standard Compliance: 802.11a/b/g
Radio Frequency Type: DSSS, CCK, OFDM
Radio Frequency Band:
802.11a: 5.15~5.25GHz, 5.25~5.35GHz, 5.725~5.825GHz
802.11b/g: U.S., Europe and Japan product covering 2.4 to
2.484 GHz
Media Access Protocol:
Carrier Sense Multiple Access with
Collision Avoidance (CSMA/CA)
Modulation:
802.11a/g: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
802.11b: DSSS (DBPSK, DQPSK, CCK)
Transmission Power:(Typical)
5.15~5.35GHz: 14dBm@ 6Mbps; 14dBm@ 54Mbps
5.725~5.825GHz: 14dBm@ 6Mbps; 13dBm@ 54Mbps
2.412~2.483GHz (IEEE802.11g): 17dBm@ 6Mbps;
15dBm@54Mbps
2.412~2.472GHz (IEEE802.11b): 18dBm@ 1~11Mbps
Receiver Sensitivity:(Typical)
5.15~5.35GHz: 6Mbps@ -82dBm; 54Mbps@ -67dBm
5.47~5.725GHz: 6Mbps@ -82dBm; 54Mbps@-67dBm
5.725~5.825GHz: 6Mbps@ -80dBm; 54Mbps@ -69dBm
2.412~2.472G(IEEE802.11g): 6Mbps@ -84dBm;
54Mbps@-69dBm
2.412~2.472G(IEEE802.11b): 11Mbps@ -82dBm;
1Mbps@-90dBm
Transmission Rate:
54 Mbps with auto fallback (54, 48, 36, 24, 18, 12, 11, 9, 6,
5.5, 2, 1 Mbps)
802.11b support rate: 1M, 2M, 5.5M, 11Mbps
802.11a/g support rate: 6M, 9M, 12M, 18M, 24M, 36M,
48M, 54Mbps
Transmission distance:
Up to 100 meters (@ 11 Mbps, in open areas)
Security:WEP 64-bit/128-bit, WPA, WPA2 data encryption
Antenna Connector:Reverse SMA
Antenna: External 2 dbi Dipole Antenna
WLAN Mode: Ad-Hoc (802.11b/g only), Infrastructure
Network Communication
LAN: Auto-sensing 10/100Mbps x 1, RJ45
Protection: Built-in 1.5KV magnetic isolation protection
Serial Communication
Serial Port: 4 software selectable RS-232/422/485 port f, DB9
connector
Protection: Built-in 15KV ESD protection for all signals
Data bits: 5, 6, 7, 8
Stop bits: 1, 1.5, 2
Parity: None, Even, Odd, Space, Mark
Flow Control: RTS/CTS, XON/XOFF, RS-485 ADDC™
Speed: 50 bps to 921.6 Kbps, supports Any Baud Rate
LEDs
System:Ready, SD
WLAN: Enable, Signal Strength
LAN: 10M/Link (on connector), 100M/Link (on connector)
Serial: TxD, RxD
Power Requirements
Power Input: 12 to 48 VDC
Power Consumption:
600mA@12VDC without loading USB ports,
1.2A@12VDC with loading 2 USB ports
Mechanical
Dimension (WxDxH):
150 x 100x 38 mm (without wall mount ear and antenna)
Weight: 390 g
Antenna: 110mm
Construction Material:
aluminum, 1 mm/ SECC, 1 mm for rear panel
Mounting:
Wall-mounting, DIN-rail (optional, need DK35A DIN-rail kit)
Environmental
Operating Temperature:
-10 to 60°C (14 to 140°F), 5 to 95% RH
Storage Temperature:
-20 to 80°C (-4 to 176°F), 5 to 95% RH
Anti-Vibration: 5G @ IEC-68-2-6, sine wave, 5-500 Hz,
1 Oct./min, 1 hr/axis.
Anti-Shock: 50G @ IEC-68-2-27, half sine wave, 30 ms
Regulatory Approvals
EMC: FCC, CE (Class A)
Safety:TÜV, UL, cUL
Others:RoHS, CRoHS, WEEE
Warranty: 5 years
ThinkCore W341