Installation guide

www.moxa.com e-mail: [e-mail]
13
Ready-to-Run, Reliable, Wide Temperature
Introduction to Embedded Computers
Powerful Communication and Computing
• Intel XScale IXP-422 CPU inside
(for UC-7400 Series)
The IXP-422’s RISC-based architecture and modern
semiconductor technology differs markedly from the
X86’s CISC design, providing UC-7400 with a powerful
computing engine and communication function. The ultra
low power consumption (less than 2W) CPU turns UC-
7400 series into a high performance device that will not
overheat.
• Two 10/100M LAN Ports
The two 10/100M LAN ports with built-in IXP-422 provide
you with a more reliable redundant network application,
and hardware encryption (DES, 3DES, AES, etc.) gives
your applications better security. Use these two ports for
redundant or gateway applications.
• Versatile network connections
MOXA Embedded Computers feature versatile network
connection interfaces, giving you the flexibility of choosing
the most appropriate connection equipment for your
application.
Use an external GPRS modem or V.90 modem via the
console port, or choose the LAN port with ADSL broadband
connection to communicate with the Internet world.
The wireless-ready design lets you use wireless PCMCIA
card to connect your devices to a wireless connection.
With no hard disk and fan, the UC-7400 Series
cordless design is well-suited for harsh and
outdoor environments.
• Powerful Serial Engine
MOXA embedded computers use the MOXA MU860 8-
port serial processor with on-chip hardware/software flow
control to prevent any data loss. Each port comes with a
128-byte Transmit/Receive FIFO and Burst Data Mode for
great performance.
MU860 can generate a more precise baudrate for special
applications. For example, traditional UARTs will generate
a 230400 bps baudrate for 250000 bps applications (8%
error), but MU860 can give you 254234 bps, with an error
of only 1.7%.