User`s manual

ThinkCore DA-661/662/663 WinCE User’s Manual Getting Started

2-6

world wide web HTTP (“HTP0:”), and file transfer FTP (“FTP0:”). You seldom need to use these

services. However, you can still start up or stop a service with its associated name by using the

command services. For example,

Start the FTP service with

\> services start FTP0:

Stop the FTP service with

\> services stop FTP0:

Troubleshooting Network Connectivity

The ipconfig tool prints the TCP/IP-related configuration data of a host including the IP addresses,

gateway, and DNS servers.

\> ipconfig /all

Windows IP configuration

Ethernet adapter Local Area Connection:

IP Address: 192.168.4.127

Subnet Mask: 255.255.255.0

Adapter Name: IXP425ETHNPE2

Description: IXP425ETHNPE2

Adapter Index: 2

Address: 80 86 33 33 34 12

DHCP Enabled: NO

Ethernet adapter Local Area Connection:

IP Address: 192.168.14.202

Subnet Mask: 255.255.248.0

Default Gateway: 192.168.15.254

Adapter Name: IXP425ETHNPE1

Description: IXP425ETHNPE1

Adapter Index: 3

Address: 78 56 34 91 cc dd

DHCP Enabled: NO

Host name: WindowsCE

Domain Name:

DNS Servers: 192.168.1.6

NODETYPE: 8

Routing Enabled: NO

Proxy Enabled: NO

To troubleshoot network connectivity or name resolution, use the ping command. This command

verifies IP-level connectivity to another TCP/IP computer by sending Internet Control Message

Protocol (ICMP) Echo Request messages. The corresponding return Echo Reply messages are

displayed, along with round-trip times. For more information, type ping without parameters.

\> ping www.moxa.com

Pinging Host www.moxa.com [192.168.1.16]

Reply from 192.168.1.16: Echo size=32 time<1ms TTL=126