User`s manual

2
2
Chapter 2 Getting Started
In this chapter, we explain how to use a PC to operate a DA-66X-CE computer. For clarity, the PC
that you will be using to connect to the DA-66X-CE is referred to as a development workstation,
and the DA-66X-CE computer is called a target computer.
In addition, manual steps are described to facilitate operations such as system time adjustment,
troubleshooting network connectivity, etc. Some of these operations can be done using system
commands after gaining access to the computer, and others can be done using a web-based
management system, which is described in a later chapter.
The following topics are covered in this chapter:
 Starting Your DA-661/662/663 Computer
 Resetting Your DA-661/662/663 Computer
 Operating Your DA-661/662/663 Computer via the Serial Console
 Changing the Network Settings
 Operating Your DA-661/662/663 Computer by Telnet Client
 User/Group Management
 Adjusting System Time and RTC Time
 Starting and Stopping Services
 Troubleshooting Network Connectivity
 Simple Network Management Protocol (SNMP)