User`s manual

3
3
Chapter 3 Web-based Management System
Note: Internet Explorer 5.5 or above is required to use the web based management system.
DA-660 ready-to-run embedded computers are network-centric platforms designed to be used as
front-end computers for data acquisition and industrial control. Due to the distributed
characteristics of the devices that these computers control, they often reside in harsh areas as the
devices themselves and are away from system administrators. To manage these computers,
operations such as networking/server configuration, file management, and process (thread)
monitoring/control become a critical area to consider.
A web-based management system is installed on the DA-660 computer to resolve these
management issues, and to reduce the amount of work required by system administrators. The
system incorporates often-used features in the CGI and categorizes using a menu bar.
Before operating the system, make sure you have a network connection from your PC to the target
computer, and verify that you can open an Internet browser from your PC after the connection is
established. Then, use the IP address of the target computer as a home page URL. After the main
screen is displayed, click Web-Based Management.
Input your authentication data, including user ID and password, in the corresponding fields (both
the ID and password are case sensitive) and then press Enter to request access to the management
system.
The default User ID and Password are:
User ID: admin
Password: admin
The following topics are covered in this chapter:
 System Information
 Netowrking/Server Configuration
 Serial Port Configuration
 Process (Thread) Monitoring/Control
 Launching Processes Automatically
 Services Monitoring/Control
 Binary/Text File Management