User`s manual

ThinkCore DA-660 WinCE User’s Manual Getting Started
2-7
SNMP Manager
An SNMP manager is an SNMP application that generates queries to SNMP-agent applications
and receives traps from SNMP-agent applications.
The DA-660 computer installs an SNMP agent to serve as an SNMP device. You should install the
SNMP manager on the workstation computer (for example, a Linux system) that monitors the
network. After installing the nodes, you need to configure the SNMP manager and agent.
To check SNMP agent capabilities in a target computer (e.g, network IP at 192.168.3.127), please
logon the workstation computer that, for example, a Linux-based computer, the SNMP manager
resides and type
\> snmpwalk -v 2c -c public 192.168.3.127 system
SNMPv2-MIB::sysDescr.0 Microsoft Windows CE Version 5.0 (Build 1400)
SNMPv2-MIB::sysObjectID.0 SNMPv2-SMI::enterprises.8691.13.7420
SNMPv2-MIB::sysUpTime.0 1282929
SNMPv2-MIB::sysContact.0 Your System Contact Here
SNMPv2-MIB::sysName.0 WindowsCE
You will see a series of messages from the SNMP agent. From there, you can monitor and manage
the computer.