User`s manual

DA-660 Hardware User’s Manual Introduction
1-7
Push Buttons
There are four push buttons on the ThinkCore DA-660’s front panel. These buttons are used to
operate the LCM. Going from left to right, the buttons are:
Button Action
MENU Activates the main menu, or returns to main menu anytime.
︽
Scrolls up through a list of items shown on the LCM screen’s second line
︾
Scrolls down through a list of items shown on the LCM screen’s second line
SEL Selects the option listed on the LCM screen.
Real Time Clock
The ThinkCore DA-660’s real time clock is powered by a lithium battery. We strongly
recommend that you do not replace the lithium battery without help from a qualified MOXA
support engineer. If you need to change the battery, contact the MOXA RMA service team.
WARNING
There is a risk of explosion if the battery is replaced by an incorrect type.
Placement Options
Desktop
Place your ThinkCore DA-660 on a clean, flat, well-ventilated desktop. For better ventilation,
attach the 4 pads from the desktop kit to the bottom of the unit, and leave some space between the
DA-660 and other equipment. Do not place equipment or objects on top of the unit, as this might
cause damage.
Rack Mounting
ThinkCore DA-660 is designed to be mounted on a standard 19-inch rack. Two L-shaped metal
plates come standard with DA-660. Use the enclosed pair of L-shaped metal plates and screws to
fasten your DA-660 to the rack cabinet. Two placement options are available. You can either lock
the front or the rear panel of the DA-660 to the front of the rack. Each L-shaped plate has 6 holes,
leaving two outer or inner holes open for your convenience.