ThinkCore DA-660 Hardware User’s Manual First Edition, May 2006 www.moxa.com/product MOXA Systems Co., Ltd. Tel: +886-2-8919-1711 Fax: +886-2-8919-1722 Web: www.moxa.com MOXA Technical Support support@moxa.com.tw Worldwide: The Americas support@moxa.
ThinkCore DA-660 Hardware User’s Manual The Hardware described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright © 2006 MOXA Systems Co., Ltd. All rights reserved. Reproduction without permission is prohibited. Trademarks MOXA is a registered trademark of The MOXA Group. All other trademarks or registered marks in this manual belong to their respective manufacturers.
Table of Contents Chapter 1 Introduction ..................................................................................................1-1 Overview.................................................................................................................................. 1-2 Package Checklist....................................................................................................... 1-2 Product Features ...................................................................................
1 Chapter 1 Introduction Thank you for purchasing the MOXA ThinkCore DA-660 RISC-based ready-to-run embedded computer. The product’s features include 8/16 RS-232/422/485 serial ports, and dual 10/100 Mbps Ethernet ports based on the Intel XScale IXP-422 communication processor, which are packed into a standard 1U, 19-inch wide rack-mounted rugged enclosure. These features make DA-660 ideal for industrial environment applications, and let users easily install DA-660 on a standard 19-inch rack.
DA-660 Hardware User’s Manual Introduction Overview ThinkCore DA-660 products are RISC-based ready-to-run embedded computers designed for industrial data applications. ThinkCore DA-660 products feature 8 or 16 RS-232/422/485 serial ports and dual Ethernet ports based on the Intel XScale IXP-422 communication processor, all packed into a standard 1U, 19-inch wide rack-mounted rugged enclosure.
DA-660 Hardware User’s Manual Introduction Hardware Specifications ThinkCore DA-660-16 ThinkCore DA-660-8 Intel Xscale, IXP-422 266 MHz Intel Xscale, IXP-422 266 MHz 128 MB 128 MB 32 MB 32 MB Auto-sensing 10/100 Mbps × 2 with built-in 1.5 KV magnetic isolation protection RJ45 Connector Serial Port RS-232/422/485 × 16 RS-232/422/485 × 8 RJ45 Connector RJ45 Connector Serial Protection 15 KV ESD for all signals Data Bits 5, 6, 7, 8 Stop Bits 1, 1.
DA-660 Hardware User’s Manual Introduction Hardware Introduction Appearance and Dimensions Appearance DA-660-16 Front View LED Indicators System Status, LAN, Serial Tx/Rx LCM Display Panel 19-inch Rackmount Ear Reset Button Push Buttons DA-660-16 Rear View Power Input, 100-240 VAC/VDC RS-232/422/485 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LAN2 Power Input LAN1 100-240 VAC/VDC Console RS-232/422/485 Serial Port x 8/16 RJ45, 50 to 921.
DA-660 Hardware User’s Manual Introduction Dimensions DA-660-8 198 mm (7.8") DA-660-16 DA-660-8 LAN2 2 3 4 5 6 7 8 Console LAN1 45 mm (1.77") 1 DA-660-16 LAN2 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15 16 Console LAN1 440 mm (17.3") 480 mm (19") Hardware Block Diagram The following block diagram shows the layout of the ThinkCore DA-660’s internal components. The only difference between DA-660-16 and DA-660-8 is in the number of serial ports.
DA-660 Hardware User’s Manual Introduction LED Indicators LED indicators are located on the front panel of ThinkCore DA-660. DA-660-16 has 35 LED indicators and DA-660-8 has 19 LED indicators. The only difference between these two products lies in the serial port indicators. Refer to the following table for information about each LED.
DA-660 Hardware User’s Manual Introduction Push Buttons There are four push buttons on the ThinkCore DA-660’s front panel. These buttons are used to operate the LCM. Going from left to right, the buttons are: Button MENU ︽ ︾ SEL Action Activates the main menu, or returns to main menu anytime. Scrolls up through a list of items shown on the LCM screen’s second line Scrolls down through a list of items shown on the LCM screen’s second line Selects the option listed on the LCM screen.
DA-660 Hardware User’s Manual Introduction Connecting the Hardware This section describes how to connect ThinkCore DA-660 to serial devices. We cover Wiring Requirements, Connecting the Power, Connecting to the Network, Connecting to a Serial Device, and Connecting to the Console Port. Wiring Requirements ATTENTION Safety First! Be sure to disconnect the power cord before installing and/or wiring your DA-660. Wiring Caution! Calculate the maximum possible current in each power wire and common wire.
DA-660 Hardware User’s Manual Introduction Connecting to the Network Connect one end of the Ethernet cable to one of the ThinkCore DA-660’s 10/100M Ethernet ports (8-pin RJ45) and the other end of the cable to the Ethernet network. If the cable is properly connected, the DA-660 will indicate a valid connection to the Ethernet in the following ways: 8 1 8 1 The lower right corner LED indicator glows a solid green color when the cable is properly connected to a 100 Mbps Ethernet network.
A Appendix A Service Information This appendix shows you how to contact MOXA for information about this and other products, and how to report problems.
UC-7420/7410 User’s Manual Service Information MOXA Internet Services Customer satisfaction is our primary concern. To ensure that customers receive the full benefit of our products, MOXA Internet Services has been set up to provide technical support, driver updates, product information, and user’s manual updates. The following services are provided E-mail for technical support................................support@moxa.com World Wide Web (WWW) Site for product information: .............................
UC-7420/7410 User’s Manual Service Information Problem Report Form MOXA ThinkCore DA-660 Series Customer name: Company: Tel: Fax: Email: Date: 1. MOXA Product: ThinkCore DA-660-16 2. Serial Number: ThinkCore DA-660-8 _________________ Problem Description: Please describe the problem clearly. Include as many details as you can. This will help us reproduce the problem, and expedite the repair of your product.
UC-7420/7410 User’s Manual Service Information Product Return Procedure For product repair, exchange, or refund, the customer must: Provide evidence of original purchase. Obtain a Product Return Agreement (PRA) from the sales representative or dealer. Fill out the Problem Report Form (PRF). Include as much details as possible for a shorter product repair time. Carefully pack the product in an anti-static package, and send it, pre-paid, to the dealer.
