User`s manual

SMG-1100/6100 SMG Manager
3-23
When the serial port is set to RTU Slave or ASCII Slave mode, simple select the Slave ID entry in the table and
modify the range. For TCP slaves, you can add an entry that assigns a range of Slave IDs from any IP address
access.
On the Miscellaneous page, all fields are set independently for each serial port. The Response Time-out field
is used to configure how long the gateway will wait for a response from a Modbus ASCII or RTU slave. Please
refer to your device manufacturer’s documentation to manually set the response time-out. The Gateway
Exception is used to determine whether the SMG-1100 should create an exception and send to Master or just
ignore it when a response timeout occurs. The Slave Exception is used to determine whether the SMG-1100
should pass through or drop any exceptions that come from serial ports.