User`s manual

SMG-1100/6100 SMG Manager
3-15
Off-Line Import IPSec Configuration
Tunnel Name: Select the Off-Line Client and click Next to continue.
Tunnel Name: Provide a name for this IPSec tunnel. In the screenshot below the tunnel is named T1.
Server/Client Tunnel ID: Provide the ID that will be used in authentication. This ID must be in the form of
a domain name preceded by @ or an IP address. For example, you may use @S1 to indicate this is the server
of the IPSec tunnel and use @C1 to indicate this is the client of the IPSec tunnel.
Server Subnet: Identify the private subnet behind the SMG-6100. Use the format subnet network/subnet
mask.
Client IP: This option is used to make the IPSec gateway itself use its internal IP. This IP is the local LAN IP of
the SMG-1100.
RSA Key Length: Select a RSA key length from the drop-down list.