User`s manual

SMG-1100/6100 SMG Manager
3-12
Before using the GPRS, the APN (Access Point Name), Username (user ID account) and Password (user
password) must be filled in for the modem initialization command.
Connect rule: Select Connect at boot to configure the SMG-1100 to automatically connect to GPRS upon
boot up, or select none if not using a GPRS connection.
Reconnect rule: Select Periodically Reconnect to configure the SMG-1100 to automatically reconnect to
GPRS if disconnected.
Reconnect interval: If the reconnect rule is set as Periodically Reconnect, you can designate the reconnect
interval time (1 to 3600 seconds).
Status: Shows the current SIM card and PIN lock status.
Connection Test: Click this to check your settings. The SMG-1100 will try to establish a GPRS connection and
then disconnect.