User`s manual

SMG-1100/6100 SMG Manager
3-5
5. If you have left Gateway Server and would like to connect to the existing server again, right-click the name
of the Gateway, and then select Connect.
6. Please note that only one Gateway Server is allowed to connect. If you would like to connect to another
server, disconnect the first server and then connect the second one.
Introduction to the SMG Manager Interface
When you connect to a Gateway Server, the following screen will appear.
1. Menu Bar: Includes the Tools, Function, View, and Help menus.
2. Toolbar: The icons shown, listed from left to right, are Login/Change Password, Locate, Set Device Name,
Network Setup, GPRS, VPN(IPSec), Modbus, Import/Export Configuration, Apply, Monitor Connections,
Firmware Upgrade and Reboot. Note that if right-click a device, a list of function options will appear. Each
function will be introduced in the following sections.
3. Gateway & Device Tree: In this area, you can view the Gateway Server and the currently active SMGs
under this Gateway. Both gateway and IP address can be shown here. Double-click the Gateway icon, you
can view the all device information on the right frame.
4. Device List: This area contains all of the information on the SMGs attached under the Gateway Service that
you have connected to. This includes device IP, model name, firmware version, and device name.
Double-click a device icon to view information about a single SMG in the right frame.
Menu Bar Introduction
This section briefly introduces the options under the Tools, View, and Help menus.
Tools
Gateway Manager: Enables users to manage the gateway information and connect to the Device
Configuration Gateway Server.