User`s manual

2
2
Chapter 2 Getting Started
This chapter explains how the initial installation process for the PT-G7509. There are three ways
to access the PT-G7509’s configuration settings: the serial console, Telnet console, and web
console. If you do not know the PT-G7509’s IP address, you can open the serial console by
connecting the PT-G7509 to a PC’s COM port with a short serial cable. You can open the Telnet
or web console over an Ethernet LAN or over the Internet.
The following topics are covered:
 Serial Console Configuration (115200, None, 8, 1, VT100)
 Configuration by Telnet Console
 Configuration by Web Browser
 Disabling Telnet and Browser Access