User`s manual

PT-G7509 User’s Manual Featured Functions
3-55
VLAN Mode
Setting Description Factory Default
802.1Q VLAN Set VLAN mode to 802.1Q VLAN
Port-based VLAN Set VLAN mode to Port-based VLAN
802.1Q VLAN
(Unaware)
Set VLAN mode to Unaware
802.1Q VLAN
Management VLAN ID
Setting Description Factory Default
VLAN ID from 1
to 4094
Assigns the VLAN ID of this PT-G7509. 1
Port Type
Setting Description Factory Default
Access This port type is used to connect single devices without
tags.
Trunk Select Trunk port type to connect another 802.1Q
VLAN aware switch or another LAN that combines
tagged and/or untagged devices and/or other
switches/hubs.
Access
ATTENTION
For communication redundancy in the VLAN environment, set Redundant Port Coupling Port
and Coupling Control Port as Trunk Port since these ports act as the backbone to transmit all
packets of different VLANs to different PT-G7509 units.
Port PVID
Setting Description Factory Default
VID range from 1
to 4094
This sets the default VLAN ID for untagged devices that
connect to the port.
1
Fixed VLAN List (Tagged)
Setting Description Factory Default
VID range from 1
to 4094
This field will be active only when selecting the Trunk
port type. Set the other VLAN ID for tagged devices that
connect to the Trunk port. Use commas to separate
different VIDs.
None
Forbidden VLAN List
Setting Description Factory Default
VID range from 1
to 4094
This field will be active only when selecting the Trunk
port type. Set the VLAN IDs that will not be supported
by this trunk port. Use commas to separate different
VIDs.
None