User`s manual

PT-G7509 User’s Manual Introduction
1-2
Overview
The PowerTrans PT-G7509 is equipped with 9 Combo Gigabit Ethernet ports, making it ideal for
upgrading an existing network to Gigabit speeds and building a new full Gigabit backbone. The
PT-G7509 is designed to meet the demands of power substation automation systems (IEC 61850-3,
IEEE 1613), traffic control systems (NEMA TS 2), and railway applications (EN50121-4). Gigabit
transmission increases bandwidth for higher performance and transfers large amounts of video,
voice, and data across a network quickly. The redundant Ethernet Turbo Ring, Turbo Chain and
RSTP/STP (IEEE 802.1w/D) increase system reliability and the availability of your network
backbone. The optional front or rear wiring makes the PT-G7509 suitable for different application
types.
Package Checklist
The PowerTrans PT-G7509 is shipped with the following items. If any of these items is missing or
damaged, please contact your customer service representative for assistance.
y 1 PowerTrans PT-G7509
y Hardware installation guide
y CD-ROM with user’s manual and SNMP MIB file
y Warranty statement
y RJ45-to-DB9 console port cable
y Protective caps for unused ports
y 2 rackmount attachments
Software Features
y IPv6 Ready logo awarded (IPv6 Logo Committee certified)
y IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks
y DHCP Option 82 for IP address assignment with different policies
y Modbus/TCP industrial Ethernet protocol supported
y Turbo Ring , Turbo Chain, and RSTP/STP (IEEE 802.1W/D)
y IGMP snooping, GMRP to filter multicast traffic from industrial Ethernet protocols
y IEEE 802.1Q VLAN, GVRP for easier network planning
y QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
y 802.3ad, LACP for bandwidth optimization
y IEEE 802.1X and https/SSL to enhance network security
y SNMP V1/V2c/V3 for differential network management
y RMON for efficient, proactive network monitoring
y Supports ABC-01 for system configuration backup
y Access restriction by MAC address
y Port mirroring for online debugging
y Automatic warnings by email, relay output
y Automatic recovery of connected device’s IP addresses
y Line-swap fast recovery
y Configuration through web browser, Telnet/serial console, Windows utility, and ABC-01