User`s manual

PT-G7509 User’s Manual Featured Functions
3-43
Configuring STP/RSTP
The following figures indicate which Spanning Tree Protocol parameters can be configured. A
more detailed explanation of each parameter is given below the figure.
At the top of this page, the user can check the Current Status of this function. For RSTP, you will
see:
Now Active:
This field shows which communication protocol is being used—Turbo Ring, RSTP, or neither.
Root/Not Root
This field appears only for RSTP mode. It indicates whether or not this PT-G7509 is the Root of
the Spanning Tree (the root is determined automatically).
At the bottom of this page, the user can configure the Settings for the selected protocol. For RSTP,
you can configure:
Protocol of Redundancy
Setting Description Factory Default
Turbo Ring Selects the Turbo Ring protocol. None
RSTP (IEEE 802.1w/1D) Selects the RSTP protocol. None
Bridge Priority
Setting Description Factory Default
Numerical value selected
by user
Specifies the PT-G7509’s bridge priority. A
lower number means a higher priority, which
means a greater chance of being established as
the root of the Spanning Tree topology.
32768